12/8/2019 - Company: WuXi JOBST BEARING CO.,LTD Located in WuXi, China, JOBST Bearings is a leading bearing manufacturer that only offers the latest, state of the art ball bearings and roller bearings around the world. From miniature bearings to huge heavy industry bearings, we're committed to providing our customers with only the best.
Key Words: China Bearing Manufacturer; Cheap Bearings;
Related Websites: www.sribearings.com
China Bearings manufacturer, Wuxi JOBST bearing: Mechanical parts and machinery used to play a crucial role, so we have to carry out regular maintenance and maintenance of machinery and equipment in order to improve performance and extend the life of mechanical parts, when the mechanical stop, the need for mechanical zero correlation detection means, to ensure the safety components.
1, Bearing clearance and lubrication are very important.
Check before you must first clean the surface of the machine, and then remove the bearing (like 6203 bearing ) surrounding parts. Seal is very fragile parts, so be careful disassembly, do not use excessive force, then carefully check the seal and the surrounding parts, if the poor have shown symptoms, be sure to replace the lost, poor seal can cause the bearing Yan was damaged and equipment downtime.
2. Check lubricant
Stained little lubricant friction between two fingers, if the presence of pollutants, can feel it, or coated with a thin layer of lubricant to the back of the hand and seal rays.
3, replace the lubricant
Oil lubricated bearings in addition to diarrhea after the old oil, if possible, then poured fresh oil and let the machine a few minutes at low speed rotation. Residual oil to collect as much as possible contaminants, and then spilled addition to the oil, the oil in the first before use by filtration. If you don’t have any on hand, bearing manufacturers and bearing wholesalers can both help you.
Grease lubricated bearings in the replacement of grease used in addition to Joe should avoid cotton material then angle to bearing any part, because these residual fibers may be wedged in between rolling parts and cause damage, especially small bearing applications should pay more attention to this problem.
4, cover exposed bearings
Check the bearing, do not let bearing exposure to environmental contaminants or moisture. If the work is interrupted, should be oiled paper or similar material coated plastic film has been machine.
If cleaning without masking the bearing under check is performed without disassembly possible circumstances, to coat with a brush to coat with whitespirit, then a lint-free cloth or compressed air ( Be careful not to let the bearing assembly starting rotation).